Sydney Plumbing Hot Water provides gas heater service in Wetherill Park through NSW licensed gasfitters (Licence No. 231986C). We inspect, clean, test and repair your unit, and we explain what we found before any repair goes ahead. A standard visit covers the burner, ignition, flame safety device, ventilation and connections. It finishes with a full heating cycle test, and you get a clear quote with no hidden fees.
Most callouts we attend trace back to parts that a routine service would have caught early. The two complaints we hear most are a heater that keeps shutting off and a pilot light that won’t stay lit. Once a technician has the cover off, both usually have a simple cause.

A licensed technician inspects and cleans the appliance, then tests it while it runs. After that, you get a written quote for anything that needs attention. This service suits you if you are:
Our team has completed more than 5000 projects across Sydney. Every job is fully insured with public liability cover. The work is done by gasfitters who hold a current NSW licence.
A professional service finds worn parts, dirty burners and airflow faults before they cause a breakdown or a safety risk.
People often mix up two separate dangers, and the difference matters:
Neglect also costs you comfort. A dirty burner or a failing thermocouple shows up as weak heat, a yellow flame or a unit that switches off halfway through the evening. A thermocouple is a small sensor that tells the heater the flame is lit. When it wears out, the heater thinks the flame has gone and shuts the gas off, even though it’s still burning. It’s one of the parts we replace most often. You can see the full range of work we handle on our gas heater service and repair page.
Every service follows the same set of checks, so nothing gets skipped on a busy winter day.

| Check | What the technician looks at | Why it matters |
|---|---|---|
| Burner and flame | Cleans the burner and checks the flame colour and shape | A dirty burner causes poor combustion and weak heat |
| Ignition and pilot | Igniter, pilot assembly and spark | Faults here stop the unit lighting or staying lit |
| Thermocouple or flame safety device | Response and condition | This part shuts off the supply if the flame fails |
| Ventilation and flue | Blockages, damage and clearances | Poor airflow can lead to carbon monoxide build up |
| Connections and leak test | Fittings, bayonet and hoses | Confirms there are no leaks |
| Filter and fan | Dust build up and fan operation | A clogged filter makes the unit overheat and cut out |
| Operational test | A full heating cycle from start to shutdown | Catches faults that only appear once the unit is warm |
| Carbon monoxide spillage test | Combustion products escaping into the room, where the appliance type calls for it | Confirms the unit is safe to run indoors |
When the checks are done, we talk you through the results in plain language. If something needs fixing, you’ll have a quote in hand before we touch it.

The usual causes are a worn thermocouple, a dirty burner or a ventilation problem. A common pattern is a unit that lights normally, then cuts out after ten or twenty minutes. That timing is a useful clue for the technician, so jot it down before you call us.
The thermocouple or a dirty pilot assembly is often to blame. If relighting only buys you a short while before it goes out again, it’s time to book a technician.
Several customers have told us in their reviews that they heard crackling just before the heater stopped. We test the unit on site to find the real cause, because guessing over the phone rarely helps anyone.
Try cleaning the filter yourself first, as this often clears the light. Our guide shows you how to clean a Rinnai heater filter. If the light stays on after a clean, book a technician.
We’ll be straight with you: not every heater is worth repairing. The unit’s age, whether parts are still available and the state of the heat exchanger all play a part. The heat exchanger is the metal chamber that passes heat into your room. Together, these factors decide whether a repair makes sense or a replacement is better value.
Call a licensed gasfitter straight away if:
NSW Fair Trading advises servicing gas appliances at least every two years, or sooner if the manufacturer recommends it. Your owner’s manual will list the right interval for your model. Between visits, there are a few simple things you can do yourself:
In NSW, only a licensed gasfitter may work on gas appliances and connections. Owners should never open the burner or the supply side. Unflued heaters release combustion fumes straight into the room. That means they rely on good ventilation and regular servicing to run safely.

Not sure whether we work on your model? Tell us the brand when you book, and we’ll confirm before the visit.
Get an Outstanding Quality Service, from a Sydney Plumber you can trust and afford.
It’s worth asking about same day bookings when you get in touch, as availability changes through the season. We service gas heaters in Wetherill Park.
Have your heating checked before the cold sets in, or sooner if it’s already playing up. Our licensed team (Licence No. 231986C) works to upfront pricing, so you’ll know the cost before any work begins.
Best Prices in Sydney | We’ll Beat Any Quote* | Price Match on Installation (terms and conditions apply)
Book your gas heater service in Wetherill Park today, or explore our full heater service range.
Get an Outstanding Quality Service, from a Sydney Plumber you can trust and afford.
Book at least every two years, or sooner if your manufacturer recommends it. We suggest late summer or early autumn, because faults tend to show up on the first cold night, when everyone else is calling too. Older units should be checked more often, and so should any that have cut out or changed flame colour.
A leak is unburnt gas escaping, and you can smell it. If you do, turn off the appliance and stay away from switches and naked flames. Open the windows, leave the house and call a licensed gasfitter or your gas distributor’s emergency line. Carbon monoxide has no smell at all. If you suspect it, switch the unit off and get everyone into fresh air, then seek medical advice if anyone feels unwell.
You can clean the filter and keep the vents clear. In NSW, anything involving burners, supply parts or connections must be done by a licensed gasfitter.
That depends on the age of the unit, the cost of parts and the condition of the heat exchanger. Before we start, we set out the repair cost and the replacement option side by side. That way you can make the call with real numbers in front of you.
Yes, we service Heat & Glo fireplaces. They need the same core checks as a heater: burner, ignition, flue and connections.
Write down the model, any error codes and when the fault tends to happen. Switch the unit off a little beforehand so it’s cool enough to inspect, and clear the space around it. If you have earlier service paperwork, keep it handy for the technician.
Please fill form below and we will get back to you back.