0402 487 444
  
  Call - 0402 487 444
 
 
Plumbing Fitting
 

       Fittings are performed in order to connect the pipe to the plumbing systems for the connection of straight pipe or tubing sections so as to adapt it to different sizes and shapes so as to bring regulations in the fluid flow system. The plumbing fitting performed for non common pipes can be expensive and it is time consuming. It requires materials and tools in order to install. The plumbing fitting ensures that the fitting and the plumbing is performed with accuracy at the time of its initial installations. The installations performed in the kitchen areas include

  • Installations of new dishwasher
  • Kitchen sink
  
Plumbing fitting also includes, extending the supply of water to the drainage system. The material used for fitting is of the same nature may it be polyvinyl chloride, steel or copper and plastics.
 
Certain fittings used for the purpose of plumbing fitting include:
  • Plug
  • Union
  • Street Elbow
  • Elbow
  • Tee
  • Cross
  • Coupling
  • Cap
  • And Nipple
The other forms of fittings include:  
  • Double Sanitary Tee
  • Combo - Tee
  • Wye
  • Sanitary Tee
  • Trap Primers
  • Clean Outs
  • Closet Flange
  


An authorized Plumbing Fitting has the involvement of a proficient technician who performs the plumbing fitting for gas stove, its repair, washing machines, laundry tubs, new bath, shower, toilet, new bathroom vanity unit, replacement roof guttering and downpipes, gutters and new gardens hose taps.


 
Gas Fitting and Installation
 

       The Plumbing and gas fitting services are often offered for the Residential, Commercial and Industrial areas with services like Gas fitting for the full service plumbing, heating and gas piping with Gas Supply, Gas Pipe Work for gas appliances. The horizontal gas pipe which generally passes through the room should be fire stopped for the purpose of its safe functioning and for preventing the gas or smoke from passing. The gas fitting and installations must be carried out by skilled technician and proficient team of plumbers. Gas fitting also includes meter relocations, extending of the supply pipes, installing the extra bayonet points and its detection in the gas leaks.  Installations of the new stove by replacing the old stove can also take place by an experienced gasfitting expert or a plumber. A mistake in the installations of the gas stove at the time of gas fitting can lead to dangerous consequences, hazardous for life. Gas fitting also includes the transformation of the BBQ from LPG to Natural Gas.

The Gas Leakages can cause hazardous consequences and the repair and be expensive even for a little amount of damage. Generally a gas fitter uses gas fitting tools like bubble leak detector and special leak detection fluid. The prior indication of gas leakage can be detected by a slight Smell of gas, or a bill which can be very high then its usage.  A DIY test is carried out for the purpose by turning off all the gas appliances present in the area.

   
Safe Installations of the Gas Fitting
  • Prior to the installations of the gas system it is necessary to turn all the gas appliances present in the area with turning off the pilot lights and the main gas inlet
  • The screw has to be removed which is fit for the temporary base with is on the outlet area of the gas meter by locating a manometer in it by adjusting the gauge to Zero
  • Gas cock then needs to be opened by letting 2 - 4 mbar to pass through and then again closing and fitting the gas cock again
  • It is necessary to detect if there is slow increase in the level of the pressure which is shown over the gas gauge. This may indicate that there is some amount of leakage happening, when the gas cock is closed, hence a proficient plumber or technician is needed for the purpose.
 
There are several factors taken into consideration at the time when the gas fitting is performed:
  • Burner pressure at appliances
  • Working pressure at the meter
  • Heat Input
  • Working pressure of the system
  • Standing pressure
   

0402 487 444